Wrights will work in partnership with you from the beginning, fulfilling all your dental decontamination requirements. Furthermore, we will help you create an HTM 01-05 compliant decontamination facility now, and for the needs of the future.
Not to mention that thanks our excellent knowledge and customer service, we offer a complete follow-up beyond installation for the life of your LDU, giving you complete peace of mind.
We will go the extra mile, for you.
Dental Decontamination Room
This fundamental part of your practice or laboratory is crucial to ensure correct and safe daily procedures. Therefore, during the dental decontamination process, the right tools, instruments and equipment will be essential to ensure a proper sterilisation of dental instruments.
In addition, our dental decontamination room design expertise will ensure the proper utilisation of your practice or lab space.
Want to know more? Call our Freephone 0800 66 88 99 to enquire about our Dental Decontamination Products.
One of our Equipment Managers will be in touch for a free consultation, demonstration or quotation of our newest equipment.
For any other query or doubt, please Contact Us or call our Freephone 0800 66 88 99. We will be happy to assist you!
Our Accredited Partnerships
To find out more about our manufacturers and their extensive options, click on their logo below:
Meanwhile, you might also be interested in:
(click on each drop down to view products)
Employing a copper chamber to minimise internal temperature fluctuations. Efficiently sterilising more instruments while minimising wasted space.
Small enough to fit in any space
The iClave mini weighs only 15.5kg. Just plug it in and start sterilising. Its compact and elegant design makes it an ideal fit for any clinic interior.
iClave HP can sterilise 12 wrapped or 18 unwrapped handpieces in one cycle.
As a result of its special heating system, iClave HP prevents thermal stress and allows gentle sterilisation without the risk of damaging handpieces.
Despite the fast cycles, iClave HP has very low power and water consumption. The special heating system enables power and water savings with obvious cost and environmental benefits.
iClave Plus Air turbines, contra-angles, and other dynamic dental instruments consist of high-precision micro mechanisms and therefore benefit from careful sterilisation to maintain performance. NSK choose to use a highly conductive copper chamber to satisfy Class B, Europe’s strictest sterilisation standard. The system delivers outstanding efficiency despite its large capacity. Click here for more information on this product.
A NEW CONCEPT OF THE AUTOCLAVE UNIQUE AND ESSENTIAL DEVICE
The autoclave is the key device within each medical structure, therefore it is fundamental to choose a well-known, referenced product which can rely on a widespread network of technical support.
ONYX B is the new autoclave by Tecno-Gaz, a world leading Company for many years.
CYCLES FOR ALL NEEDS Flexibility is essential to rationalise workflow and operative efficiency. Onyx B offers a wide range of cycles, all studied to help you every day.
ENERGY SAVING Onyx B has low energetic consumption as well as unbeatable consumption/load ratio. Economic saving and benefit for the environment.
P.I.D. SYSTEM P.I.D. means Proportional Integral Derivate and represents the apex of closed loop controls. The structure of this technologically advanced control is simple and flexible.
Europa B Evo is a last generation autoclave, developed with the collaboration of the research office Tecno-Gaz and with other external important structures of development.
Europa B Evo is essential in all medical and dental structures and in every field where it is necessary to have safe sterilisation for all materials: hollow, porous, solid, free and enveloped. A necessary device in order to assure the utmost preservation for operator and patient and an absolute operative serenity.
Europa B Evo is the continuity of a success that Tecno-Gaz is obtaining for many years, and, in fact, thousand of professional people use Tecno-Gaz autoclaves with great satisfaction.
Pre-set, non-modificable cycles
All cycles are pre-set at the factory and guarantee perfect and safe sterilization of treated materials. There is no way the operator can manipulate or alter the cycles, and this safeguards against risks deriving from human error.
Class N Load: metal or solid materials; instruments with no cavities and no obstacles to the steam penetration.
The temperatures set for our autoclave cycles are 134°C and 121°C. The 134°C cycles are normally used for the sterilization of solid and ferrous materials. 121°C cycles are normally used for sterilization of delicate materials.
Safety devices installed
Certified safety valve
PED on sterilization chambers
Insulation of the chamber with certified ceramic material.
Autoclave in compliance with EN13060 for type N Loads:
- Microprocessor electronic system
- Integrated system for evaluation and control
- New electronic control panel
- Safety door: dynamic, electromagnetic, electronic
- Automatic cycle without operator
- No-condensation function and automatic cut off
- Stainless steel chamber
- 2 water tanks
- Tray holder with aluminum trays
- Predisposition to osmosis system
- Connection to external biological incubator for biological test
- P.I.D. regulation system for quick compensation of possible change
- Automatic barometric adjustment
ONE is a new generation sealer that has been created to reduce envelope packaging time, monitor the welding quality, and seal all types of paper for sterilization, including folded paper.
• 12 mm sealing band.
• 32 cm sealing bar.
• Simple paper introduction.
• Active electronic control over the couple of heating elements.
• Visible cutting area.
• Possible incorrect sealing warning.
• Can be positioned anywhere.
Tecno Seal is a roll thermosealer with automatic photocell feed system. This is the ultimate expression of technology applied to medical sealing, used in medical centres, dental surgeries, hospitals and clinics.
It guarantees very high output, maximum operating speed without routine maintenance; it uses pre-cut bags sealed on 3 sides (available in various sizes and supplied by Tecno-Gaz). This important feature allows constant control over the current sterile conditions of the instruments. Another feature is an electronic control and management card allowing the use parameter adjustments.
The use of this machine is simple and rational. The operator only has to insert the bag containing the instrument into the sealing machine support; the photocell automatically, autonomously feeds the bag and seals it.
Tecno Seal Print has an integrated printer which, during sealing, automatically prints on the bag the packaging and expiry date, as well as the required regulatory symbols.
This important feature allows constant control over the current sterile conditions of the instruments. Another feature is an electronic control and management card allowing the use parameter adjustments.
The use of this machine is simple and rational. The operator only has to insert the bag containing the instrument into the sealing machine support; the photocell automatically, autonomously feeds the bag, seals it and prints the packaging data. This action can be continuative and repetitive to ensure high output and considerable time reduction. Surgeries which intend to certify and document all the sterilization procedures must have Tecno Seal Print.
Free: The ultrasonic bath is designed to wash instruments used in the medical, dental, cosmetic, veterinary fields and all areas which require an ultrasonic washing.
The cleansing device using ultrasound (via cavitation) allows thorough cleansing of parts which are difficult to reach by manual cleansing, and avoids any risk resulting from unsafe handling of contaminated instruments.
Heating – FREE The device goes on to the detergent heating phase. It stops automatically at the preset temperature. Note that, during ultrasonic cleansing, the detergent temperature tends to rise independently.
Degassing (DEGAS) – FREE and BASIC The device starts activating the ultrasonic phases intermittently. This process reduces the gas dissolved in the liquid, thus improving the efficiency of the subsequent washing.
Ultrasonic cleaning – FREE and BASIC Washing phase through ultrasonic cavitation.
The Pura Plus osmosis system is an extremely compact osmosis device designed for connection directly to the autoclave, to guarantee a constant supply of pure water.
The system can be installed in a number of positions to facilitate mounting and the optimum organisation of the available space.
PuraPlus is fitted with a series of osmotic membranes and filters, with an average duration of between 600 and 800 litres, depending on the original hardness of the water. The cartridge should therefore need replacing about once a year, or after 600/700 cycles.
Changing the filter is an extremely simple process and can easily be carried out by the users. The overall cost of the filters is very reasonable, and the cost per litre is therefore almost negligible. When the Pura Plus system is not producing water, it is not pressurized, and this avoids all kinds of problems caused.
Lisa Autoclave Easy to use, performance, full traceability The new Lisa sterilizer with the easy to use colour touch screen and user-friendly menu structure fits perfectly into your dental practice. The faster performance of the new Lisa is based on the patented Eco Dry technology that allows precise management of B-cycle steam sterilization for an average load (2kg) in 30 minutes. Click here for more information on this product.
Thermoklenz The First Choice Thermo Washer Disinfector Dryer. Having a validated reproducible cleaning process within your decontamination cycle protects both you and your patients. ThermoKlenz automatically regulates water temperature and detergent quantity, so you can be sure that you are getting a consistent cleaning result every time. Click here for more information on this product.
Assistina Perfect cleaning inside and outside Now you can concentrate on what is really important: your patients. The fully automatic Assistina 3×3 takes over the time-consuming process of preparing instruments such as straight and contra-angle handpieces and turbines for sterilization. Click here for more information on this product.
MS Autoclave The Ultimate Type N Sterilizer MS offers economical N-class sterilization, addressing the important considerations of efficiency and long-term operational costs. It is a modern, quality built machine for today’s environment, where economy, performance and compliance are the overriding requirements. Click here for more information on this product.
Lina Sterilizer The essentials of sterilization Lina, the latest addition to the W&H range of sterilizers, is a reliable partner which can be adapted to your practice requirements. Click here for more information about this product.